Overview of aluminum nitride ceramics

Aluminum Nitride Ceramic is an advanced ceramic material with aluminum nitride as the main component. It has been widely used in electronics, optics, and mechanics due to its unique properties.

Features of aluminum nitride ceramics

High thermal conductivity: Aluminum nitride ceramics have relatively high thermal conductivity, usually between 170-260 W/m·K, which makes it an excellent heat dissipation material. It is especially suitable for electronic devices that require efficient heat dissipation, such as substrate materials for power semiconductor devices.

Good electrical insulation: Despite its high thermal conductivity, aluminum nitride ceramics are excellent insulators of electricity, which can effectively prevent current leakage and ensure the safe operation of electronic components.

Low dielectric constant and dielectric loss: These characteristics make aluminum nitride ceramics very suitable for use in high-frequency circuits because it can reduce energy loss during signal transmission.

High temperature resistance: Aluminum nitride ceramics can maintain structural stability and strength at extremely high temperatures. Its melting point is about 2800°C, so it is suitable for applications in high temperature environments.

Low thermal expansion coefficient: Compared with semiconductor materials such as silicon, aluminum nitride has a lower thermal expansion coefficient, which means it has better dimensional stability when the temperature changes, which helps improve packaging reliability.

Corrosion resistance: Aluminum nitride ceramics have good chemical stability to most molten metals and are not easily oxidized or corroded, allowing them to perform well in harsh environments.

High mechanical strength: Although not as hard as some other types of ceramic materials, aluminum nitride ceramics still provide enough mechanical strength to allow them to be used in many structural applications.

(170W Aluminum Nitride Sheet Piece ALN Ceramic Plate with Hole for LED)

Specifications of 170W Aluminum Nitride Sheet Piece ALN Ceramic Plate with Hole for LED

The 170W Aluminum Nitride Sheet Piece ALN Ceramic Plate with Hole is created for high-performance LED applications. This item makes use of aluminum nitride (AlN) ceramic material. The material supplies excellent thermal conductivity. It makes sure reliable warmth dissipation. This feature is critical for maintaining LED efficiency. Home plate deals with power approximately 170W. It matches high-power LED systems.

The ceramic plate includes a pre-drilled hole. The opening streamlines installment. It permits protected installing for LED modules. The layout reduces mechanical tension. It improves stability throughout procedure. The dimensions are exact. Requirement thickness is 1.0 mm. Size and width choices differ. Custom dimensions are offered.

Aluminum nitride stands up to corrosion. It carries out well in rough environments. The product stays stable at heats. Running variety covers -50 ° C to 350 ° C. This ensures integrity under severe conditions. The surface area is smooth. It prevents damages to LED components.

The plate’s thermal conductivity gets to 170-180 W/m · K. This surpasses conventional alumina ceramics. Heat spreads evenly across the surface. It prevents hotspots. LED life-span expands consequently. Electrical insulation is strong. It endures high voltages. Security boosts for electronic tools.

Applications consist of LED lighting systems. It works in auto LED selections. Industrial devices take advantage of its sturdiness. Electronic devices requiring thermal administration usage this plate. It fits power modules and semiconductor gadgets.

The product is lightweight. It decreases overall system weight. Handling and setup stay straightforward. No added finishes are needed. Upkeep prices stay reduced.

Technical specifications include a thickness of 3.3 g/cm FOUR. Flexural toughness goes beyond 300 MPa. The hole size is personalized. Typical choices are 2mm, 3mm, or 5mm. Resistance levels fulfill market standards.

This ALN ceramic plate is RoHS-compliant. It meets international safety standards. Personalized designs are possible. Ask for details forms or opening patterns are approved.

The item guarantees lasting efficiency. It incorporates sophisticated products with sensible design. Thermal and electrical properties make it perfect for LED services.

(170W Aluminum Nitride Sheet Piece ALN Ceramic Plate with Hole for LED)

Applications of 170W Aluminum Nitride Sheet Piece ALN Ceramic Plate with Hole for LED

The 170W Light Weight Aluminum Nitride (ALN) ceramic plate with holes functions as a high-performance remedy for advanced thermal administration in LED systems. This ceramic plate excels in dissipating warm effectively as a result of aluminum nitride’s remarkable thermal conductivity. LEDs produce substantial warm during operation, which can reduce lifespan and efficiency. The ALN ceramic plate addresses this by moving heat far from LED chips quickly, making certain stable light output and toughness.

Home plate’s style consists of precision-drilled openings tailored for LED mounting. This enables direct attachment to warm sinks or various other cooling frameworks, streamlining setting up. The holes ensure appropriate alignment, decreasing installation errors. Light weight aluminum nitride’s electric insulation buildings stop brief circuits, making it risk-free for high-power LED configurations.

Past LEDs, this ceramic plate fits applications in power electronics, RF devices, and semiconductor devices. Its resistance to thermal shock and rust makes sure integrity in extreme environments. In laser diodes or high-frequency circuits, home plate preserves part stability by managing warmth build-up.

The 170W rating highlights its capability to deal with extreme thermal tons without deteriorating. Unlike typical products like alumina, light weight aluminum nitride provides far better heat circulation, decreasing hotspots. This is critical for densely jam-packed LED ranges or small electronic systems where area limits airflow.

Customization choices include varying thicknesses, hole patterns, and surface coatings to match particular project demands. The material’s reduced thermal development coefficient makes certain dimensional security under temperature variations, stopping bending or cracking.

Manufacturers favor ALN ceramic plates for their combination of mechanical toughness and lightweight homes. They lower overall system weight while maintaining effectiveness, ideal for mobile lights or aerospace applications. Compatibility with soldering and bonding procedures additionally simplifies integration into existing designs.

This item sustains markets requiring exact thermal control, from automobile lights to commercial automation. Its adaptability and performance make it a preferred selection for designers focusing on effectiveness and longevity in high-temperature environments.

Company Introduction

Advanced Ceramics founded on October 17, 2014, is a high-tech enterprise committed to the research and development, production, processing, sales and technical services of ceramic relative materials and products.. Since its establishment in 2014, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Silicon carbide ceramic products, Boron Carbide Ceramic Products, Boron Nitride Ceramic Products, Silicon Carbide Ceramic Products, Silicon Nitride Ceramic Products, Zirconium Dioxide Ceramic Products, Quartz Products, etc. Please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 170W Aluminum Nitride Sheet Piece ALN Ceramic Plate with Hole for LED

1. What makes the 170W Aluminum Nitride Sheet ideal for LED applications? This ceramic plate efficiently conducts heat. LEDs generate heat during operation. Excessive heat reduces lifespan. Aluminum nitride spreads heat quickly. It keeps LEDs cool. This ensures stable performance. High thermal conductivity (170W/m·K) outperforms traditional materials like alumina. The hole allows easy mounting. It fits standard LED fixtures.

2. Can this ALN ceramic plate handle high-power LED setups? Yes. The material handles extreme thermal loads. It works with LEDs up to 170W. The structure resists thermal shock. Sudden temperature changes won’t crack it. This reliability suits industrial-grade lighting. Automotive LEDs and stage lights benefit. The design prevents overheating in tight spaces.

3. Why choose aluminum nitride over other ceramics? Aluminum nitride moves heat faster. Alumina offers 20-30W/m·K. Aluminum nitride reaches 170W/m·K. Heat transfers away from LEDs quicker. This prevents hot spots. It also resists corrosion. Harsh environments won’t degrade it. Electrical insulation remains strong. Safety improves in high-voltage setups.

4. How does the hole in the plate affect performance? The hole aids installation. Screws or bolts secure the LED module. No extra machining is needed. Heat distribution stays even. The hole’s position avoids blocking heat flow. Airflow around the LED improves. Maintenance becomes simpler. Components stay accessible for replacements.

5. What precautions ensure long-term use? Avoid mechanical stress during installation. Sharp impacts can chip edges. Clean surfaces before attaching LEDs. Dust lowers heat transfer efficiency. Use thermal paste for better contact. Store in dry conditions. Moisture causes no damage. Check for cracks periodically. Replace if surface defects appear. Proper handling maximizes durability.

(170W Aluminum Nitride Sheet Piece ALN Ceramic Plate with Hole for LED)